ATX Mid-Tower Chassis
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
- I/O Port Supports Dual USB 3.0
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
Long press on RGB button for 3 seconds, fans will blink twice which now are controlled by MB software, and vice versa.
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Expanded from the gaming spirit of the classic Overseer RX-I chassis, the special design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The tempered glass side panel of the Commander C33 TG ARGB is built to be more durable and scratch resistant than older acrylic panels.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
The Commander C33 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
| 120mm | 240mm | 360mm | 140mm | 280mm | 420mm | |
|---|---|---|---|---|---|---|
| Front | ● | ● | ● | ● | ● | - |
| Top | ● | ● | - | ● | ● | - |
| Rear | ● | - | - | - | - | - |
(Water 3.0 and Floe series)
| Perform | Pro | 240 Series | 360 Series | 140 Series | 280 Series | |
|---|---|---|---|---|---|---|
| Front | ● | ● | ● | ● | ● | ● |
| Top | ● | ● | ● | - | ● | ● |
| Rear | ● | ● | - | - | - | - |
| 120mm | 140mm | 200mm | |
|---|---|---|---|
| Front | 3 | 2 | 2 |
| Top | 2 | 2 | - |
| Rear | 1 | - | - |
| 120mm | 140mm | 200mm | |
|---|---|---|---|
| PURE FAN Series | ● | ● | ● |
| LUNA FAN Series | ● | ● | ● |
| Riing FAN Series | ● | ● | ● |
Synchronizuj z oprogramowaniem RGB płyt głównych
Zaprojektowane do synchronizacji z płytami ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync i ASRock Polychrome. Obsługuje płyty główne z adresowalnym złączem RGB 5V, umożliwiając sterowanie oświetleniem bezpośrednio z wyżej wymienionego oprogramowania bez instalowania dodatkowego aplikacji lub kontrolerów oświetlenia. Aby uzyskać więcej informacji, odwiedź oficjalne strony internetowe ASUS, GIGABYTE, MSI i ASRock.
-
Aura Addressable Header
ASUS -
Digital Pin Header
GIGABYTE -
JRAINBOW Header
MSI -
Addressable RGB LED Header
ASRock
| Kategoria | Uwaga |
| Obudowy, wentylatory ARGB, AIO ARGB |
|
| Pamięci RGB, bloki wodne VGA, Distro Plate |
|
| P/N | CA-1N4-00M1WN-00 |
|---|---|
| Saria | Commander |
| Model | Commander C33 TG ARGB |
| Wymiar (Wys. x Szer. x Gł.) | 462 x 233 x 518 mm (18.2 x 9.2 x 20.4 inch) |
| WAGA NETTO | 7.84 kg / 17.29 lb |
| PANEL BOCZNY | 4mm Tempered Glass x1 |
| Kolor | Exterior & Interior : Black |
| MATERIAŁ | SPCC |
| SYSTEM CHŁODZENIA | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16 dBA) Front (intake) : 200 x 200 x 30 mm ARGB fan x2 (800rpm, 29.2 dBA) |
| Zatoki dyskowe -Dostępne -Ukryte |
- 3 x 3.5“ or 2.5” (HDD Bracket); 2 x 2.5” (HDD Bracket) |
| GNIAZDA ROZSZERZEŃ | 7 + 2 |
| PŁYTY GŁÓWNE | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| PORTY WE/WY | USB 3.0 x 2, HD Audio x 1, RGB Switch x 1 |
| ZASILACZ | Standard PS2 PSU (optional) |
| WSPARCIE WENTYLATORÓW | Front: 3 x 120mm, 2 x 140mm, 2 x 200mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm, 1 x 140mm |
| WIELKOŚĆ CHŁODNICY | Front: 1 x 360mm, 1 x 280mm Top: 1 x 240mm, 1 x 280mm Rear: 1 x 120mm |
| PRZEŚWIT | CPU cooler height limitation: 180mm PSU length limitation: 200mm VGA length limitation: 310mm(With reservoir) 410mm(Without reservoir) VGA width limitation(Vertically): 45mm VGA height limitation: 110mm RAM height limitation: 35mm (With 140mm radiator series) 50mm (With 120mm radiator series) |
